Cree LED surface mounted spotlight veranda Gomera ab | warm white | set of 6, 8, 10 or 12 pieces
Delivery time:
Description
The warm white light colour (2700k) of the Gomera LED spots creates a cosy atmosphere on your veranda. Each surface-mounted spotlight has a cable of 5 metres. These cables are single-insulated. The advantage of this is that the cables remain thin, but are well protected. Because the cables are thin, you only need to drill a small hole in the beams of the porch for each surface-mounted spotlight, so the sturdiness of the beams is not affected. The surface spots have a diameter of 33 mm and a height of 21 mm.
You can switch the spots on and off with the Hamulight remote control. The remote control is supplied with batteries and wall brackets. The included transformer ensures that the incoming 230 V is converted to low voltage and the surface spots have to be plugged into the parallel connector.
Don't know yet how you are going to hide the transformer and connector? Then a wall box is a nice and safe way to do this. And is the 5-metre cable not long enough? You can extend the cables with one or more extension cables. All these accessories are available on our webshop.
Tip: make sure that after assembling this set, you can still easily reach the transformer and connector.
You receive a 3-year guarantee on the spotlights in this set. Look under the heading specifications or do you have any other questions? Contact our LED specialists for advice. Need more than 12 surface spots for your porch? That's possible! Ask our LED specialists for advice. They can advise you on how best to go about this.
More Information
| Article number | LOV1020-06 |
|---|---|
| EAN code | 7435124512581 |
| Brand | Hamulight |
| Spot color | Aluminium |
| Suitable for | Inside & outside |
| Light color | Warm white (2700K) |
| Consumption | 3 watt |
| Input voltage | 230V AC |
| LED chip | Cree |
| Dimmable | Yes |
| Lumen per LED (including lens) | 155 lm |
| Color Rendering Index (CRI) | >92 |
| Light angle | 30 Degrees |
| Tiltable | No |
| Cabling per LED | 500 cm |
| Transformer required? | Yes (standard included) |
| Dimensions transformer | 205 x 50 x 28 mm |
| Remote control range | 10 meter |
| Circuit | Parallel |
| Diameter | 33 mm |
| Height | 21 mm |
| Material | Aluminium |
| IP value | Spots: IP44, Trafo: IP44 |
| Quality mark | CE, Rohs |
| Warranty | Spots: 3 years, Trafo: 2 years |
| Energy label old | A+ |
| Energy label new | G |
Product sheets
Here you can download information about this product.
Reviews
Product Questions
As the name suggests, with surface-mounted spotlights, you screw the spotlights onto the beam. With recessed spots, the spots are mounted in the girders.
Yes, screws and a bezel are included to mount the spot.
No, the remote control shown in the picture is the one that is included.
No, you don't need to fill the empty connections with jumpers, as it is a switched system.
No, it's not possible to program multiple remote controls on one transformer.
Yes, the transformer is included as standard.
